VersaSpeed 100 – Rapid Hardening Horizontal Repair Mortar

VersaSpeed 100 is a single-component (meaning you just add water), rapid hardening repair mortar. Designed for fast repairs, it uses micro-fiber reinforcement to reduce shrinkage and enhance strength. Once repaired and cured, surfaces can take regular traffic in a very short time. It’s formulated for horizontal repairs: floors, pavement, decks, loading dock surfaces, etc. It also works in vertical or overhead “form & pour” applications under certain circumstances.

• Very fast set time and strength gain — you can open repaired areas to standard tire traffic just 2 hours after final set. This means minimal downtime.
• Epoxy coating allowed early — after ~4 hours (at ~21 °C / 70 °F) you can apply an epoxy sealer or coating over the repair.
• Micro-fiber reinforcement — helps prevent cracking, improve durability, and reduces plastic shrinkage and drying shrinkage.
• Shrinkage compensated / reduced — the formulation is designed to limit shrinkage which can cause cracking or bonding issues.
• Integral corrosion inhibitor — helps protect embedded steel reinforcement from corrosion, which is useful in repairs on reinforced concrete.
• Versatile placement depth — can be used neat (without aggregate) up to 4 in (10 cm) thick. For thicker parts (4-6 in / 10-15 cm), it can be extended with clean, saturated-surface-dry (SSD) pea gravel up to 50% by weight.
• Interior or exterior use — works in both climate-protected or exposed environments, giving more flexibility to contractors.

Some of the key typical use-cases for VersaSpeed 100 include:

• Repairs to industrial, commercial, or institutional floors where rapid return-to-service is needed (warehouses, loading docks).
• Repairing pavements, roads, or highways (patches, spalls) that need to be ready quickly for traffic.
• Fixing bridges, parking decks, ramps where durability and speed matter.
• Form & pour or patching for vertical or overhead surfaces (though horizontal repair is the primary design).

• Standard compliance

Meets ASTM C928 — “Standard Specification for Packaged, Dry, Rapid-Hardening, Cementitious Materials for Concrete Repair”

• Regional spec compliance

Alberta Transportation Technical Standards – Spec B391

• Maximum neat thickness

Up to 4 inches (10 cm) without aggregate

• Extended thickness

Between 4-6 in (10-15 cm) when extended with up to 50% by weight pea gravel (clean, SSD)

• Traffic return time

Standard tire traffic in 2 hours after final set (at 70 °F / ~21 °C)

• Bag size: 50 lb (22.7 kg) per bag.
• Yield: As above – neat application gives about 0.39 cubic feet per bag; with aggregate extension you get more volume per bag.