Fibreglass Rebar 10MM Flat-work

Fibreglass Rebar is a proven economical solution to reinforcing concrete structures. With a life span of more than 100 years, fiberglass rebar is a more durable and much longer-lasting solution than steel rebar. It is approved and manufactured in compliance with CSA S807 and ACI 440.

• 100 % Non-Corrosive
• Non-Magnetic
• Stronger than steel
• Light weight -1/4 the weight of Steel
• Electrical insulator
• Thermal insulator
• It can be cut using a steel saw, a band saw, and or a grinder with a diamond blade
• It has the same installation as steel rebar but does not require bends
• Much higher fatigue resistance than steel
• Made in Canada

• Bridges,
• EMI & RFI Applications
• Water Treatment
• Dams
• Parking garages
• Tunnel Applications
• Roads
• Medical Technology Centers

• Tensile Strength- 1000 Mpa (145 ksi)
• Bond Strength to Concrete- 20 Mpa Minimum (2900 Psi Minimum)
• Tensile Modulus- 65 Gpa (9427 ksi)
• Tensile Load- 74 kN (16636 lbf)
• Ultimate Strain (efu)- 1.5 %
• Resistance to Alkali Environment- +90% of ultimate tensile capacity after 2160 hours of direct exposure to an alkali solution with a pH level of 13 at 60 degrees Celsius
• Minimum Operating Temperature -40 degrees Celsius with Zero effect
• Meets Many Standards- CSA-S6-06, CSA-S806-02, ISIS Design Manual No. 3, ISIS Design Manual No. 5, ACI 440.1R-06, ACI 440R-07, ACI 440.5-08, ACI 440.6-08, AASHTO GFRP-1
• StorageLong-term outdoor storage requires tarping to prevent UV damage